November 13, 2026

You load the washer, press start and nothing happens. Or the lights come on but the cycle never begins. Before assuming the worst, it helps to know that a washer must pass several checks before it starts, and one of the most important is confirming that the door or lid is closed and locked.

Quick Checks Before Calling for Repair

  • Power: make sure the washer is plugged in and check the circuit breaker. If the outlet is a GFCI outlet, press the reset button.
  • Control lock: many washers have a child lock or control lock that disables the buttons. Check the manual for how to turn it off; it often involves holding a button for a few seconds.
  • Delay start: if delay start is set, the washer will wait before starting the cycle.
  • Water supply: make sure both water valves behind the washer are open. Some washers will not continue a cycle if they cannot fill.
  • Door or lid fully closed: a sock or item of clothing caught in the door can stop it from latching.

How the Door Lock Works on Front-Load Washers

Front-load washers lock the door before the cycle begins so it cannot be opened while the drum is full of water or spinning. The door lock assembly has a latch, a locking mechanism and a switch that tells the control board the door is locked. If any part fails, the washer will not start, or it may start and stop with an error code.

Common signs of a door lock problem include a clicking sound with no start, a door lock light that blinks, a door that will not lock or will not unlock, and a broken door hook on the door itself.

How the Lid Switch Works on Top-Load Washers

Top-load washers use a lid switch or lid lock to confirm the lid is closed. On many models the washer will fill with the lid open but will not agitate or spin until the lid is closed. If the switch fails, the washer may fill and then stop, or never start at all.

Never bypass a lid switch or door lock. These are safety devices that keep hands away from a spinning drum.

Other Causes of a Washer That Won’t Start

  • Control board or user interface: a failed board or worn buttons can keep the washer from responding.
  • Motor or motor control: if the washer fills but the drum never moves, the motor or its control may have failed.
  • Error codes: many washers display a code that points to the problem. Write it down before calling for service, as it helps with diagnosis.

When to Call a Technician

If the washer has power, the control lock and delay start are off, and the door or lid is closing properly but the washer still will not start, it is time for a professional diagnosis. A technician can test the door lock or lid switch, the wiring and the control board and replace the part that failed.

Need Help in Philadelphia?

If your washer still won’t start after these checks, Appliance Repair Brothers provides same or next day on-site washing machine repair in Philadelphia and nearby areas. We give a 90 day warranty on all repairs and manufacturer parts. Call 1.267.690.8148, Monday to Friday 8am to 6pm, to book a visit.