November 13, 2026
When a dryer runs but the drum does not turn, your clothes will not dry no matter how long you wait. The good news is that the cause is often a single worn part. The sounds the dryer makes, and whether it runs at all, are useful clues.
How the Drum Turns
In most household dryers, a motor turns a long rubber belt that wraps around the drum. An idler pulley keeps the belt tight, and rollers or glides support the drum as it turns. If any of these parts fail, the drum can stop turning even though the dryer seems to be running.
Common Causes and Their Signs
Broken drive belt
This is the most common cause. Signs include:
- The motor hums or runs, but the drum does not move
- The drum turns very easily by hand with the dryer off
- A loud thump or snap before the drum stopped
Some dryers have a belt switch that stops the motor when the belt breaks, so the dryer may not run at all.
Failed idler pulley
If the idler pulley seizes or breaks, the belt loses tension and slips. A squealing or screeching noise before the drum stopped is a common warning sign.
Worn drum rollers or glides
Worn rollers usually cause thumping or rumbling first. If a roller seizes completely, the drum can become hard to turn and the belt may slip or break.
Motor problems
If you hear a hum but nothing turns, and the drum does not spin easily by hand, the motor may be failing or something may be jammed. Continuing to run a humming motor can damage it further.
Dryer does not run at all
If the dryer does not start, the cause may be a door switch, a start switch, a blown thermal fuse or the control. On many dryers, a blown thermal fuse stops the motor completely. A thermal fuse usually blows because the dryer overheated, often due to a clogged vent, so the vent should be checked too.
What You Can Check
- Make sure the door closes fully and the door switch clicks.
- Check the circuit breaker. Electric dryers use a double breaker, and if one half trips, the dryer may run but not heat, or not start.
- With the dryer unplugged, turn the drum by hand. If it spins freely with no resistance, the belt is likely broken.
- Clean the lint screen and check that the outside vent flap opens when the dryer runs.
Replacing a belt or rollers means opening the cabinet. Always unplug the dryer first, and on gas dryers be careful not to damage the gas line.
When to Call a Technician
Call for service if the drum does not turn, if the dryer hums without starting, or if you heard squealing or thumping before it stopped. A technician can replace the belt, pulley, rollers or motor and check for the cause, such as overheating from a blocked vent.
Need Help in Philadelphia?
If your dryer drum has stopped turning, Appliance Repair Brothers provides same or next day on-site dryer repair in Philadelphia and nearby areas. We give a 90 day warranty on all repairs and manufacturer parts. Call 1.267.690.8148, Monday to Friday 8am to 6pm, to book a visit.
