November 13, 2026
A gas oven that will not heat, or that takes much longer than usual to preheat, is one of the most common oven problems. In many cases the cause is a worn igniter. It is a small part, but the oven cannot work without it.
How a Gas Oven Igniter Works
Most gas ovens use a hot surface igniter, sometimes called a glow bar. When you turn the oven on, electricity flows through the igniter and it heats up until it glows. The igniter is wired in series with the oven’s gas safety valve. When the igniter draws enough current, the valve opens, gas flows to the burner, and the glowing igniter lights it.
Over time, igniters weaken. A weak igniter can still glow, but it no longer draws enough current to open the gas valve fully. The result is an oven that does not light or lights only after a long delay.
Signs of a Weak or Failed Igniter
- The igniter glows orange, but the burner does not light
- The oven takes much longer than usual to preheat
- The oven heats unevenly or cannot reach the set temperature
- The burner lights, goes out, and relights during cooking
- The igniter does not glow at all
- The cooktop burners work, but the oven does not
Some ovens have a separate igniter for the broil burner, so bake and broil can fail independently.
Other Causes of a Gas Oven Not Heating
- Gas supply: if the cooktop burners also do not light, check that the gas supply valve is open.
- Gas safety valve: a failed valve will not open even with a good igniter.
- Temperature sensor or control board: these tell the oven when to heat. If they fail, the oven may not call for heat.
- Wiring: a burned wire or connection to the igniter can stop the circuit.
Safety First
If you smell gas, do not try to light the oven and do not turn electrical switches on or off. Leave the home and call your gas utility (PGW in Philadelphia) or 911 from outside. A normal igniter delay does not cause a strong gas smell.
Replacing an igniter involves gas and electrical connections. Testing it properly requires measuring the current it draws, not just checking whether it glows. For safety, this work is best left to a trained technician.
When to Call a Technician
Call for service if your gas oven glows but does not light, if preheating takes much longer than it used to, or if the oven does not heat at all while the cooktop works. A technician can test the igniter, gas valve and controls and replace the part that failed.
Need Help in Philadelphia?
If your gas oven is not heating properly, Appliance Repair Brothers provides same or next day on-site oven and range repair in Philadelphia and nearby areas. We give a 90 day warranty on all repairs and manufacturer parts. Call 1.267.690.8148, Monday to Friday 8am to 6pm, to book a visit.
